#11
|
||||
|
||||
And what is wrong with that?
__________________
"AND I hope they are from the planet of the "Chunk spunky Mary-Lou Retton clones". - Ironnerd "Those who trade liberty for security have neither" - Benjamin Franklin "Semroc is almost always the answer" - Stefanj www.paulsavia.com www.soundclick.com/paulsavia |
#12
|
||||
|
||||
Nothing. Nothing at all!
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#13
|
||||
|
||||
BORG = Big Orange Retail Giant (Home Depot)
And wow, 7 of 9 gets an 11 in my book ...
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#14
|
||||
|
||||
I have used Deft for many years. Just pour some into your empty sanding sealer jar and you have the perfect set-up with unlimited refills. Less volume to evaporate too.
Good way to go on Titebond too. They sell both Titebond I and II by the gallon at Home Depot. Jerry |
#15
|
||||
|
||||
Quote:
Hmmm. I've GOT to get me some now! Can you post a photo of the can? I have a BORG (not 7 of 9) 1/2 mile from my house. I'll get over there when I can walk again.
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#16
|
||||
|
||||
Quote:
Yep, I did just that. Opening and then resealing a quart-sized can gets old. Tip: On paint cans, use a brad nail to punch a few holes in the recess at the top of the can. The liquid drains back, and the lid seals the holes when you close up the can. I still wipe the recess before putting the lid back on, to minimize buildup, but it is a lot less to mop up.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#17
|
||||
|
||||
Quote:
Here you go ...
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#18
|
|||
|
|||
Very good ,on all points
I`ll check the "BORG" this weekend ,although i don`t think they sell Deft up here in Canada.Not too big a problem,as I`m going for a drive to the US before Christmas ,so I`ll get some there. paul |
#19
|
||||
|
||||
Does this stuff gum up sand paper the way aerogloss does? If not then I will give it a try
|
#20
|
||||
|
||||
Aero Gloss does NOT gum up paper providing you sand with the CORRECT paper/film.
I use K&S flexi-grit washable sanding film. It is available in variety paks in ANY decent hobby shop. Generally I use the two black and one orange sheets. Throw out the red and tan sheets; they are FAR too fine to be of ANY value.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
Thread Tools | Search this Thread |
Display Modes | |
|
|